Hot Water Heating Air Cooling System Ultra Thin Fan Coil
1. Ultra thin exposed floor standing fan coil unit main components
(1)Casing
Advanced quality galvanized sheet, waterproof, dustproof, and corrosion proof, also have a good performance in dark wet condition.
(2)Motor
High quality and reliability plastic sealed motor, through dynamic balance test, quiet design and stable performance.
(3)Fan
Unit features a high quality cross-flow fan with tube type impeller;The fan has a good dynamic balance and a stable performance, and minimizes the operation sound while ensuring enough air flow and the static pressure of outlet air by using efficient sound-dampening and heat-insulation material.
(4)Cooling/Heating Coil
Features seamless copper tube mechanically expanded to aluminum shutter fins, high heat transfer efficiency, good toughness and can bear high water pressure. Fin pitch designed by software, enough heat exchanging area, less dirt retention and air flow smoothly.
(4)Condensate Water Pan
Features PVC drain pan with,hollow structure design can enchance the thermal insulation properties,at the same time to provent from leaking.
(5)Water Connector
Professional design, water flow uniform distribution, small water resistance. Particular pipe clamp to ensure steady pipe connecting.
2. Ultra thin exposed floor standing fan coil brief introduction
3. Slim exposed floor standing wall mounted fan coil construction features
(1) Cooling: Inlet air temperature DB 27ºC,WB 19.5ºC; Chilled water inlet/outlet temp. 7ºC/12ºC.
(2) Heating: Inlet air temperature DB 20°C, heating water inlet/outlet temperature 60°C/50ºC.
7. Ultra thin fan coil installtion instruction
8. Our fan coil production line
Every fan coil has strict production process, including assembly, testing, packing.
9. Our warranty, technical support and failure claim procedures
(1) Warranty
a. Eurostars HVAC units delivered to customers are carefully examined and tested, with 48 hours trouble-free trial operation.
b. Eurostars HVAC units enjoy 1~1.5 years guarantee ever since B/L date.
(2)Technical support
a. Eurostars provide full technical support and training courses after equipment installation and commissioning.
b. 7*24 hours phone assistance on technical support.
c. Eurostars provide overseas guide installation,but not for free.
(3)Failure claim procedures
a. Detailed written failure description is required by fax or by mail, indicating the relevant equipment information and detailed description of failure.
b. Relevant pictures are required for failure confirmation.
c. Eurostars engineering and after-sales service team will check and form a diagnosis report.
d. Further trouble-shooting solutions will be offered to customers within 24 hours after receiving the written description and pictures.
10.FAQ
Q: Can your company produce non-standard machine?
A: Sure, our factory has more than 30 years' experience in design and manufacturing chiller, we also supply the machine based on the specification provided by the customers. You just need to give us your detailed requests, we will design and manufacture after communication and confirmation.
Q: Can I have a sample for testing before ordering products?
A: Yes, you can. And you are warmly welcomed to visit our factory before PO.
Q: What is the warranty of products?
A: Warranty: 12~24 months after Bill of Lading date. Any unartificial failure occurred within the period, we'll supply you the spare parts for free, and permanent technical support & consultation all life long for the machines.
Q: How to properly install the fan coil unit?
A: We have very detailed user manual and installation instructions, also can be directly telephone or online video guidance.
11. Our Ccustomer visit
EUROSTARS was established in 2006, has a professional technical team to research and develope HVAC products. We offer OEM/ODM service to our clients.
1. Ultra thin exposed floor standing fan coil unit main components
(1)Casing
Advanced quality galvanized sheet, waterproof, dustproof, and corrosion proof, also have a good performance in dark wet condition.
(2)Motor
High quality and reliability plastic sealed motor, through dynamic balance test, quiet design and stable performance.
(3)Fan
Unit features a high quality cross-flow fan with tube type impeller;The fan has a good dynamic balance and a stable performance, and minimizes the operation sound while ensuring enough air flow and the static pressure of outlet air by using efficient sound-dampening and heat-insulation material.
(4)Cooling/Heating Coil
Features seamless copper tube mechanically expanded to aluminum shutter fins, high heat transfer efficiency, good toughness and can bear high water pressure. Fin pitch designed by software, enough heat exchanging area, less dirt retention and air flow smoothly.
(4)Condensate Water Pan
Features PVC drain pan with,hollow structure design can enchance the thermal insulation properties,at the same time to provent from leaking.
(5)Water Connector
Professional design, water flow uniform distribution, small water resistance. Particular pipe clamp to ensure steady pipe connecting.
2. Ultra thin exposed floor standing fan coil brief introduction
| Product name | Ultra thin vertical exposed fan coils |
| Cooling capacity | 1.015-3.615kW |
| Heating capacity | 1.615-5.765kW |
| DB/WB | 27ºC / 19.5ºC |
| Model | EST200UT2~EST600UT2 |
| Airflow | 200,300,400,500,600 CMH |
| Fan type | Cross-flow |
| Motor | Plastic packaged |
| Funtion | Air Conditioner Terminal Unit |
| Application | Commercial builings,Hotel,Hospital, etc. |
3. Slim exposed floor standing wall mounted fan coil construction features
4. Super thin exposed fan coil unit main characteristics
(1)Human nature design: elegant, simple control, strong and durable, small volume, lightweight body design.
(2)Safe and reliable: each coil are 12pa pressure detection, the water inlet and outlet tube through forging copper structure, reliable and durable.
(3)High efficiency: the seamless copper tube string corrugated aluminum fins, high quality of hydraulic and mechanical expansion pipe, to ensure that the combination of fin and tube, good heat transfer performance, give play to the best effect of heat transfer.
(4)High efficiency and energy saving: Low energy consumption, fan and heat exchanger reasonable matching, third gear can ajust air volume, the fan power consumption is minimized.
5. Eurostars Fan coil unit series
(2)Safe and reliable: each coil are 12pa pressure detection, the water inlet and outlet tube through forging copper structure, reliable and durable.
(3)High efficiency: the seamless copper tube string corrugated aluminum fins, high quality of hydraulic and mechanical expansion pipe, to ensure that the combination of fin and tube, good heat transfer performance, give play to the best effect of heat transfer.
(4)High efficiency and energy saving: Low energy consumption, fan and heat exchanger reasonable matching, third gear can ajust air volume, the fan power consumption is minimized.
5. Eurostars Fan coil unit series
| 1 | Ceiling concealed fan coil unit |
| 2 | High ESP ducted fan coil unit |
| 3 | Universal concealed fan coil unit |
| 4 | Floor standing exposed fan coil unit |
| 5 | Ultra thin exposed fan coil unit |
| 6 | Ceiling exposed fan coil unit |
| 7 | Ceiling cassette fan coil unit |
| 8 | Ceiling exposed & floor standing fan coil unit |
| 9 | Wall mounted fan coil unit |
6. Slim floor standing exposed fan coil unit specification
Please ask salesman for detailed complete data or visit our website:
eurostarschiller.en.made-in-china.com
eurostarschiller.en.made-in-china.com
Remarks:Please ask salesman for detailed complete data or visit our website:
eurostarschiller.en.made-in-china.com
eurostarschiller.en.made-in-china.com
| Vertical Exposed Fan Coil Unit(Ultra thin type) | |||||||
| Model EST | 200UT2 | 300UT2 | 400UT2 | 500UT2 | 600UT2 | ||
| Air flow (m³/h) | H | 200 | 300 | 400 | 500 | 600 | |
| M | 150 | 220 | 300 | 380 | 450 | ||
| L | 115 | 165 | 235 | 295 | 345 | ||
| Rated cooling capacity | W(H) | 1015 | 1815 | 2415 | 3015 | 3615 | |
| BTU(H) | 3464 | 6195 | 8242 | 10290 | 12338 | ||
| W(M) | 815 | 1455 | 35 | 2415 | 2895 | ||
| BTU(M) | 2782 | 4966 | 119 | 8242 | 9881 | ||
| W(L) | 665 | 1185 | 1575 | 1965 | 2355 | ||
| BTU(L) | 2270 | 4044 | 5375 | 6707 | 8038 | ||
| Rated heating capacity | W(H) | 1615 | 2915 | 3865 | 4815 | 5765 | |
| BTU(H) | 5512 | 9949 | 13191 | 16434 | 19676 | ||
| W(M) | 1295 | 2335 | 3095 | 3855 | 4615 | ||
| BTU(M) | 4420 | 7969 | 10563 | 13157 | 15751 | ||
| W(L) | 845 | 1525 | 2015 | 2515 | 3005 | ||
| BTU(L) | 2884 | 5205 | 6877 | 8584 | 10256 | ||
(1) Cooling: Inlet air temperature DB 27ºC,WB 19.5ºC; Chilled water inlet/outlet temp. 7ºC/12ºC.
(2) Heating: Inlet air temperature DB 20°C, heating water inlet/outlet temperature 60°C/50ºC.
7. Ultra thin fan coil installtion instruction
8. Our fan coil production line
Every fan coil has strict production process, including assembly, testing, packing.
9. Our warranty, technical support and failure claim procedures
(1) Warranty
a. Eurostars HVAC units delivered to customers are carefully examined and tested, with 48 hours trouble-free trial operation.
b. Eurostars HVAC units enjoy 1~1.5 years guarantee ever since B/L date.
(2)Technical support
a. Eurostars provide full technical support and training courses after equipment installation and commissioning.
b. 7*24 hours phone assistance on technical support.
c. Eurostars provide overseas guide installation,but not for free.
(3)Failure claim procedures
a. Detailed written failure description is required by fax or by mail, indicating the relevant equipment information and detailed description of failure.
b. Relevant pictures are required for failure confirmation.
c. Eurostars engineering and after-sales service team will check and form a diagnosis report.
d. Further trouble-shooting solutions will be offered to customers within 24 hours after receiving the written description and pictures.
10.FAQ
Q: Can your company produce non-standard machine?
A: Sure, our factory has more than 30 years' experience in design and manufacturing chiller, we also supply the machine based on the specification provided by the customers. You just need to give us your detailed requests, we will design and manufacture after communication and confirmation.
Q: Can I have a sample for testing before ordering products?
A: Yes, you can. And you are warmly welcomed to visit our factory before PO.
Q: What is the warranty of products?
A: Warranty: 12~24 months after Bill of Lading date. Any unartificial failure occurred within the period, we'll supply you the spare parts for free, and permanent technical support & consultation all life long for the machines.
Q: How to properly install the fan coil unit?
A: We have very detailed user manual and installation instructions, also can be directly telephone or online video guidance.
11. Our Ccustomer visit
EUROSTARS was established in 2006, has a professional technical team to research and develope HVAC products. We offer OEM/ODM service to our clients.
12. Fan coil unit package and delivery
For bulk order, our standard package is carton packing for fan coil, for safe delivery and easy to load/unload, we will stack several layers together with plastic film and packing straps tightly onto the plywood or plastic pallets.
For sample order, we generally use plywood box or honeycomb cardboard to protect.
13. Fan coil unit projects
We exported fan coils to Serbia, Romania, Greece, France, South Africa, Australia, Uzbekistan, Mexico, Argentina, etc..
For bulk order, our standard package is carton packing for fan coil, for safe delivery and easy to load/unload, we will stack several layers together with plastic film and packing straps tightly onto the plywood or plastic pallets.
For sample order, we generally use plywood box or honeycomb cardboard to protect.
13. Fan coil unit projects
We exported fan coils to Serbia, Romania, Greece, France, South Africa, Australia, Uzbekistan, Mexico, Argentina, etc..