Hot Water Heating Air Cooling System Wall Mounted Fan Coil
1. Wall mounted fan coil brief introduction
Fan coil unit is the terminal of central air conditioning system.It consists of cross-flow fan with plastic sealed motor and copper tube heat exchanger. The high wall fan coil unit can be wall mounted with installation steel plate, and suitable for those places that required delicate decoration. Fan coil units are widely used in hotels, restaurants, factories, hospitals, exhibition hall, shopping malls, office rooms and other industrial and civil construction of the combined air-conditioning system to meet the cooling, heating and other requirements.
2. Wall mounted fan coil unit main components
(1) Fan
Fans are plastic tangential fans with an impeller with wing-shaped fins. All fans are statically and dynamically balanced.
(2) Motor
Plastic sealed gingle-phase motors are suitable for different voltages, such as 110V, 115V, 120V, 220V, 230V, 240V. All motors have 10 percent voltage utilization range and wired to unit terminal box. Motors are designed for long life.
(3) Condensate pan
Any condensate occurring is collected in the condensate pan and conducted out of the device via a condensate tube.
(4) Heat exchanger
Coils are standard design together with rows. High efficient hydrophilic aluminum fins are mechanically bonded to seamless copper tubes. All coils are specifically designed and circuited for water use. All coils are tested at 3.3MPa.
(5) Housing
Fan coil in ABS with high mechanical characteristics and resistance to ageing.
(6) Filter and return air grille
Easily accessible filter is washable.
(7) Remote controller and display
Comfortable and intuitive, with a minimal and ergonomic design. Display is integrated in the cover cabinet, it shows the set-up of the unit: room temperature, fan speed and running mode.
3. Wall mounted fan coil features
(1)Coil: heat exchange coil in copper tube and aluminium fins with hydrophilic treatment for an easy and quick condensation drainage.
(2)Air bleed valve: easy to access, it will drain directly into the condensation collecting tray.
(3)Cross-flow fan: Designed to reach high capacities at low motor revolutions, the cross-flow fan guarantees reduced noise level and excellent performance.
(4)Remote control: comfortable and intuitive, with a minimal and ergonomic design.
(5)Automatic regulation: flaps can be automatically regulated using the remote control, for an easy and complete control of the air flow.
(6)Integrated display: integrated in the cover cabinet it shows the set-up of the unit: room temperature, fan speed and running mode.
5. Wall mounted fan coil unit specification
Please ask salesman for detailed complete data or visit our website:
eurostarschiller.en.made-in-china.com
eurostarschiller.en.made-in-china.com
Remarks:
(1) Cooling: Inlet air temperature DB 27ºC,WB 19.5ºC; Chilled water inlet/outlet temp. 7ºC/12ºC.
(2) Heating: Inlet air temperature DB 20°C, heating water inlet/outlet temperature 60°C/50ºC.
7. Our company certificates and fan coil production line
Eurostars team with more than 10 years experience of HVAC equipment and system in local China and international market, has provided qualified HVAC equipment, installation and service to 30+ countries around the world.
Every fan coil has strict production process, including assembly, testing, packing.
8. Our service and Customer visit
Pre-Sales Service
(1) Inquiry and consulting support.
(2) Sample testing support.
(3) View our Factory.
After-Sales Service
(1)Provide customers with installation and commissioning online instructions. And we also provide local whole project installation.
(2) Well-trained engineers available to overseas service.
(3) Worldwide agents and after-sale service available.
9. Fan coil unit package and delivery
For bulk order, our standard package is carton packing for fan coil, for safe delivery and easy to load/unload, we will stack several layers together with plastic film and packing straps tightly onto the plywood or plastic pallets.
For sample order, we generally use plywood box or honeycomb cardboard to protect.
10. Fan coil unit projects
We exported fan coils to Serbia, Romania, Greece, France, South Africa, Australia, Uzbekistan, Mexico, Argentina, etc..
1. Wall mounted fan coil brief introduction
Fan coil unit is the terminal of central air conditioning system.It consists of cross-flow fan with plastic sealed motor and copper tube heat exchanger. The high wall fan coil unit can be wall mounted with installation steel plate, and suitable for those places that required delicate decoration. Fan coil units are widely used in hotels, restaurants, factories, hospitals, exhibition hall, shopping malls, office rooms and other industrial and civil construction of the combined air-conditioning system to meet the cooling, heating and other requirements.
Product name | Wall mounted fan coils |
Cooling capacity | 2.85-5.6kW |
Heating capacity | 4.3-8.22kW |
DB/WB | 27ºC / 19.5ºC |
Model | EST300WM2~EST600WM2 |
Airflow | 300-600 CFM |
Fan type | Cross-flow |
Motor | Plastic sealed |
Funtion | Air Conditioner Terminal Unit |
Application | Commercial builings,Hotel, Restaurant, etc. |
2. Wall mounted fan coil unit main components
(1) Fan
Fans are plastic tangential fans with an impeller with wing-shaped fins. All fans are statically and dynamically balanced.
(2) Motor
Plastic sealed gingle-phase motors are suitable for different voltages, such as 110V, 115V, 120V, 220V, 230V, 240V. All motors have 10 percent voltage utilization range and wired to unit terminal box. Motors are designed for long life.
(3) Condensate pan
Any condensate occurring is collected in the condensate pan and conducted out of the device via a condensate tube.
(4) Heat exchanger
Coils are standard design together with rows. High efficient hydrophilic aluminum fins are mechanically bonded to seamless copper tubes. All coils are specifically designed and circuited for water use. All coils are tested at 3.3MPa.
(5) Housing
Fan coil in ABS with high mechanical characteristics and resistance to ageing.
(6) Filter and return air grille
Easily accessible filter is washable.
(7) Remote controller and display
Comfortable and intuitive, with a minimal and ergonomic design. Display is integrated in the cover cabinet, it shows the set-up of the unit: room temperature, fan speed and running mode.
3. Wall mounted fan coil features
(1)Coil: heat exchange coil in copper tube and aluminium fins with hydrophilic treatment for an easy and quick condensation drainage.
(2)Air bleed valve: easy to access, it will drain directly into the condensation collecting tray.
(3)Cross-flow fan: Designed to reach high capacities at low motor revolutions, the cross-flow fan guarantees reduced noise level and excellent performance.
(4)Remote control: comfortable and intuitive, with a minimal and ergonomic design.
(5)Automatic regulation: flaps can be automatically regulated using the remote control, for an easy and complete control of the air flow.
(6)Integrated display: integrated in the cover cabinet it shows the set-up of the unit: room temperature, fan speed and running mode.
4. Eurostars Fan coil unit series
1 | Ceiling concealed fan coil unit |
2 | High ESP ducted fan coil unit |
3 | Universal concealed fan coil unit |
4 | Floor standing exposed fan coil unit |
5 | Ultra thin exposed fan coil unit |
6 | Ceiling exposed fan coil unit |
7 | Ceiling cassette fan coil unit |
8 | Ceiling exposed & floor standing fan coil unit |
9 | Wall mounted fan coil unit |
5. Wall mounted fan coil unit specification
Please ask salesman for detailed complete data or visit our website:
eurostarschiller.en.made-in-china.com
eurostarschiller.en.made-in-china.com
Wall Mounted Split Fan Coil Unit (2 pipe system) | ||||||
Model EST~ | 300WM2 | 400WM2 | 500WM2 | 600WM2 | ||
Air flow | m3/h | 510 | 680 | 850 | 1020 | |
CFM | 300 | 400 | 500 | 600 | ||
Cooling capacity | H | W | 2850 | 3700 | 4700 | 5600 |
BTU | 9727 | 12628 | 16041 | 19113 | ||
M | W | 2500 | 2700 | 3550 | 4550 | |
BTU | 8533 | 9215 | 12116 | 15529 | ||
L | W | 1860 | 2200 | 2800 | 3900 | |
BTU | 6348 | 7509 | 9556 | 13311 | ||
Heating capacity | H | W | 4300 | 5490 | 6930 | 8220 |
BTU | 14676 | 18737 | 23652 | 28055 | ||
M | W | 3820 | 4000 | 5260 | 6820 | |
BTU | 13038 | 13652 | 17952 | 23277 | ||
L | W | 2800 | 3750 | 4200 | 6050 | |
BTU | 9556 | 12799 | 14335 | 20649 |
(1) Cooling: Inlet air temperature DB 27ºC,WB 19.5ºC; Chilled water inlet/outlet temp. 7ºC/12ºC.
(2) Heating: Inlet air temperature DB 20°C, heating water inlet/outlet temperature 60°C/50ºC.
6. Wall mounted fan coil unit various appearances and control displays
7. Our company certificates and fan coil production line
Eurostars team with more than 10 years experience of HVAC equipment and system in local China and international market, has provided qualified HVAC equipment, installation and service to 30+ countries around the world.
Every fan coil has strict production process, including assembly, testing, packing.
8. Our service and Customer visit
Pre-Sales Service
(1) Inquiry and consulting support.
(2) Sample testing support.
(3) View our Factory.
After-Sales Service
(1)Provide customers with installation and commissioning online instructions. And we also provide local whole project installation.
(2) Well-trained engineers available to overseas service.
(3) Worldwide agents and after-sale service available.
9. Fan coil unit package and delivery
For bulk order, our standard package is carton packing for fan coil, for safe delivery and easy to load/unload, we will stack several layers together with plastic film and packing straps tightly onto the plywood or plastic pallets.
For sample order, we generally use plywood box or honeycomb cardboard to protect.
10. Fan coil unit projects
We exported fan coils to Serbia, Romania, Greece, France, South Africa, Australia, Uzbekistan, Mexico, Argentina, etc..